Description
Plain - pave the way for textured rolling Pins or smooth multiple pieces of Green Stuff to stack them and craft big rocks!
- Made of clear PMMA plastic with excellent non-stick properties
- Non-toxic
- Length: 14.50 cm
- Diameter: 2.5 cm (1 inch)
How to use it:
- If necessary, mix the modeling clay according to to the manufacturer's recommendations. We have had good results with Green Stuff, Brown Stuff or Milliput Standard. The softer the modeling clay, the more difficult it is to work with. Kneadable masses are therefore best suited.
- Roll or spread the modeling clay about 1-2mm thick on the surface to be textured (e.g. the base of your model). For an even impression, the surface of the modeling clay should be as smooth as possible. This is exactly what you can use this smooth rolling pin for.
- Depending on the type of modeling clay, it is advisable to wet the textured roller with water (and a little washing-up liquid if necessary) to prevent it from sticking. With milliput, it helps to let it dry a bit after rolling it out. Modeling petroleum jelly also works well. A trial run will help you to find the right technique for the material you are using.
- Move the smooth roller with even pressure and back and forth across the prepared modeling surface until the modeling material has an even thickness. The silicone guide rings can help you achieve this easily.
- The surface is now ready to emboss a pattern with a textured rolling pin!
- Immediately after use, clean the rolling pin with a scratching brush, a toothbrush or root brush and lukewarm water (if necessary, detergent) to remove any residue on the structure rollers. If the modelling clay collects in the rolling pin´s structure during texturing, change the technique (e.g. allow Green Stuff and Milliput to harden a little or wet the roller with washing-up liquid)!
Hersteller
GSW
Calle Chelín 24, P.I. las Atalayas
03114 Alicante
Alicante
Spanien
www.greenstuffworld.com
Sicherheits
| Indicator: |
|---|
